bunker hill security camera wireless setup

Keeping a static IP instead of automatically prevents connectivity issues caused by new IP address assignments if the router power cycles.Ĭonfiguring the IP Address of Your Wireless AP The manual that comes with the device usually has this information and once you open the control panel, you can find your camera connected to it and give it an IP address of your choosing. To set up the IP address of your wireless security camera, you need to access the control panel of your access point device. RELATED Wisenet Device Manager Review (An All-In-One powerful Network Tool) Setup Diagram Some screws, zip ties, and electrical tape for covering exposed wiring.PVC pipe to act as a mast if you are planning to mount the camera indoors.One male and one female power terminal to connect the wire extension to the primary camera wire.In case your power outlet is not close by and you need to extend the wire for the camera, you will also need additional wire.You can check the camera specifications for further clarification on this. 12V DC PSU with at least 1A of output current to power the camera.This can either be a PC or a Mac with an updated and secure browser, preferably Google Chrome. A device to view the feed from the cameras is like a laptop.Some other things that you will need to complete your setup include the following: It can work great for indoor applications and would generally require an additional wireless antenna attachment to work. This would be a smaller unit with a relatively smaller range. Typical usage would be industrial locations and large office buildings. This needs to be something that has an 11dbi antenna, weatherproofing for outdoor use, and a large enough range to cover your desired area including obstructions. To ensure performance and reliability, you can choose from the following options.

While it is possible to do this using your home router, there will always be signal and reliability issues, so a dedicated device is recommended. Since your camera will be working over Wi-Fi, you will need to create a wireless network using a 2.4GHz access point.

Bunker hill security camera wireless setup